Air Fuel Ratio Calculator
Calculate the air-to-fuel mass ratio from measured air and fuel flow. Enter both flow rates in the same mass-per-time unit, such as g/s or kg/h.
Calculators
Planning tools related to classic british cars, with visible assumptions and clearly explained results.
Calculate the air-to-fuel mass ratio from measured air and fuel flow. Enter both flow rates in the same mass-per-time unit, such as g/s or kg/h.
Estimate the nominal board-foot volume of lumber from board thickness, width, and length, then multiply by the number of boards.
Estimate the fuel cost of a car trip from distance, fuel economy, and fuel price. This simple estimate assumes fuel economy and price remain constant throughout the trip.
Estimate a fixed-rate car loan’s monthly principal-and-interest payment from the amount financed, annual interest rate, and loan term. The estimate excludes fees, taxes, insurance, and other costs.
Estimate an annual car maintenance budget from your expected service visits, average cost per visit, annual parts and supplies, and annual inspection or registration expenses. This worksheet uses the amounts you enter and does not predict repairs or provide a shop quote.
Estimate a project budget from your expected labor hours, shop rate, parts, bodywork, and paint costs. This planning worksheet adds the amounts you enter and does not predict a vehicle-specific quote.
Estimate paint in gallons from the total panel area, number of coats, and paint coverage rate. Enter area and coverage in square feet and coats as a count. The estimate assumes the entered coverage rate applies to the prepared panels and does not add extra for waste, primer, clear coat, or separate products.
Estimate combined flow by multiplying the number of jets by the flow value for each jet. Assumes every jet has the same stated flow under the conditions represented by that value.
Estimate a classic car’s theoretical driving range in kilometers from fuel tank capacity in liters and average fuel consumption in liters per 100 kilometers.
Estimate a parts budget by multiplying the number of part types by the quantity needed for each type and the average price per part. The estimate assumes one average price applies to every part counted.
Estimate a valve spring's linear rate by dividing the applied force by the spring's compression. Enter force in newtons and compression in meters.
Estimate the piston compression height needed to place the piston crown at a specified distance below the engine block deck, using block deck height, crankshaft stroke, connecting-rod length, and target deck clearance. All measurements are in millimeters.
Estimate concrete volume and a planning allowance from slab dimensions, pour depth, and a waste percentage. This is a volume worksheet only and does not determine mix design or structural suitability.
Estimate material volume in cubic yards from a rectangular area’s length, width, and depth, with an optional allowance for extra material.
Estimate the combined curtain panel width needed to cover a window, using the measured window width and a fullness factor. The result is a flat-panel width before hems, seams, or pattern matching.
Estimate the deck board area and material allowance from deck dimensions, board width, gap, and an extra-waste percentage. This worksheet assumes a rectangular deck and boards running along its length.
Estimate driveshaft rotational speed from engine RPM, transmission gear ratio, and axle ratio, assuming a direct connection with no torque-converter slip or other speed loss.
Estimate the number of drywall sheets needed for a room from its wall dimensions and the sheet size you plan to use. This area-based estimate excludes ceilings, openings, waste, and layout details.
Calculate an engine's approximate total displacement in cubic centimeters from cylinder bore, stroke, and cylinder count.
Calculate a cylinder’s geometric compression ratio from its swept volume and clearance volume, using the same volume unit for both measurements.
Estimate total engine displacement in cubic centimeters from cylinder bore, stroke, and cylinder count.
Estimate theoretical engine speed in revolutions per minute from road speed, tire circumference, transmission ratio, and final-drive ratio. Assumes no tire or drivetrain slip and excludes torque-converter slip.
Estimate fabric yardage for rectangular DIY sewing and craft projects by entering the number and dimensions of pieces, usable fabric width, and an extra allowance for seams and cutting waste. The estimate assumes pieces are laid side by side across the fabric width and does not account for pattern matching or complex layouts.
Estimate the number of fence pickets needed for a straight run from its length, picket face width, spacing gap, and a chosen waste allowance. The result is a planning estimate in picket equivalents, not a rounded purchase count.
Estimate the flooring material area to order from room dimensions and a waste allowance. This area estimate does not include labor, product pricing, or installation-specific requirements.
Estimate a vehicle’s fuel economy in miles per gallon from the distance traveled and fuel used. Enter trip miles and gallons consumed to calculate the trip’s average fuel economy.
Multiply the number of shelves by the rated load per shelf to estimate the combined rated load in kilograms. Use manufacturer-provided ratings and treat the result as a simple total, not a structural safety assessment.
Calculate the overall gear reduction from the number of teeth on a driven gear and its driving gear. The result is the driven gear's rotational speed ratio relative to the driving gear, assuming direct engagement and no additional gearing.
Estimate the gravel volume in cubic feet and the material weight in US short tons from an area’s length, width, depth, and gravel bulk density.
Estimate grout volume and purchase quantity from tiled area, grout joint width, joint depth, tile size, and a waste allowance. The estimate assumes a regular square tile layout and uniform joints.
Estimate the hardwood flooring area to purchase from room dimensions and a chosen waste allowance. The result is a planning estimate in square feet, not a measurement of package quantities.
Estimate engine horsepower from torque and engine speed using the standard mechanical horsepower relationship. Enter torque in pound-feet and speed in revolutions per minute.
Estimate the insulation volume needed from the area to cover, planned insulation thickness, and a chosen waste allowance. This is a material quantity estimate, not an R-value or product suitability assessment.
Estimate the number of laminate flooring packages needed from your room dimensions, planned extra coverage, and package coverage. This is a material estimate and does not calculate installation labor or project cost.
Estimate a monthly vehicle lease payment from the vehicle price, negotiated capitalized cost, down payment, lease term, and money factor using a simplified depreciation and rent-charge worksheet. Excludes taxes, fees, rebates, and lender-specific adjustments.
Estimate total linear feet from repeated pieces by multiplying the measured length of one piece by the number of pieces. Enter all lengths in the same unit.
Estimate an oil-change interval in miles from the vehicle maker's stated interval, driving conditions, and the share of severe-condition driving. This is a planning estimate; follow the owner's manual and applicable service guidance.
Estimate the paint volume and material cost for a project from wall area, coats, coverage, and price per unit. The estimate assumes the entered area is paintable surface and does not add a waste allowance.
Estimate the number of pavers needed to cover a rectangular area using the entered dimensions, paver size, and an optional waste allowance. The estimate assumes full coverage and does not account for cuts, patterns, borders, or site conditions beyond the selected allowance.
Calculate an engine's mean piston speed from its stroke length and engine speed in revolutions per minute. The result is shown in meters per second.
Calculate a vehicle’s power-to-weight ratio from engine power and vehicle weight. Enter power in horsepower and weight in pounds to get horsepower per 1,000 pounds.
Estimate roofing material coverage from roof area, pitch, and waste allowance. This worksheet-style estimate assumes the entered area is the roof’s horizontal footprint and applies a pitch multiplier to approximate sloped surface area.
Calculate the area of a rectangular floor, wall, or other surface by entering its length and width. Enter both measurements in feet to get square footage.
Estimate the number of tiles needed for a rectangular floor or wall area, including a user-selected allowance for cuts and breakage. The result may be fractional, so round up to a whole tile when ordering.
Estimate the pressure change needed to move a tire from its current measured pressure to a target pressure. This is arithmetic only; use the vehicle and tire manufacturer’s specifications for the correct target.
Compare two tire sizes by estimating their overall diameters, circumference, and speedometer difference. Enter each tire's width, aspect ratio, and wheel diameter.
Estimate mechanical horsepower from torque in pound-feet and rotational speed in revolutions per minute using the standard unit conversion constant.
Estimate a vehicle's value after a chosen ownership period using a transparent straight-line depreciation assumption based on purchase price and expected resale value.
Estimate the number of wallpaper rolls needed from wall dimensions, roll coverage, and an allowance for pattern matching and waste. This estimate assumes rectangular walls and does not subtract doors or windows.
Estimate how far a wheel's inner and outer edges sit relative to the hub mounting face using wheel width and offset. Positive offset moves the wheel inward; negative offset moves it outward.