The VEVOR 2.5 Ton Low Profile Heavy-Duty Steel Racing Floor Jack review focuses on a steel hydraulic jack built for routine vehicle lifting, with a 3.35-inch minimum height and a 2.5-ton capacity.
Its broad stated vehicle range and compact, two-piece handle make it worth considering for a home garage, provided its lift height and capacity match the vehicle and task.
VEVOR Racing Jack Review Summary
The quick verdict

1,000+ ratings
Read Amazon ReviewsVEVOR 2.5 Ton Low Profile Steel Racing Floor Jack
A practical choice for DIYers and enthusiasts who need a steel floor jack for cars, trucks, or SUVs and value a low starting height.
- Rated to lift up to 2.5 tons, or 5,500 pounds.
- Lifting range runs from 3.35 inches to 14.96 inches.
- Uses a single-piston hydraulic pump.
- Steel construction with steel wheels; the two rear wheels are universal for steering and positioning.
Pros
- Low 3.35-inch starting height may help with access under lower vehicles.
- The 2.5-ton capacity suits a variety of common vehicle-lifting needs when used within the rating.
Consider before buying
- The maximum lifting height is 14.96 inches, which may not provide enough travel for every repair setup.
- A steel floor jack is a substantial garage tool rather than a compact portable jack; the listed weight is 13.6 kg.
Read the full review summary
This jack pairs a low starting height with a maximum lift of 14.96 inches and a rated capacity of 2.5 tons. A single-piston hydraulic pump raises the saddle, while steel wheels, including two universal rear wheels, support repositioning.
A detachable, rotating rubber saddle and foam handle bumper add protective contact points, and the handle separates into two pieces for storage.
It is aimed at owners who want one floor jack for common jobs such as tire changes, oil changes, or brake maintenance on a family car, truck, or SUV.
Its relatively low minimum height may be useful when a standard jack point is close to the ground, but the maximum height is a separate constraint: check the vehicle's lift points, the height needed for your work, and the jack's capacity before buying.
The buying factors
VEVOR Racing Jack Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Rated capacity
The 2.5-ton rating provides a substantial stated capacity for a range of personal vehicles, subject to matching the vehicle and lifting point to the jack's limits.
Low-profile access
A 3.35-inch minimum height is a useful design feature for approaching lower-clearance vehicles, though the actual fit depends on the vehicle's underside and access angle.
Maximum lift height
The 14.96-inch maximum covers some lifting needs, but buyers requiring more travel should compare that figure with the clearance their task requires.
Pump design
The single-piston hydraulic pump is a straightforward lift mechanism; no pump-count or speed advantage is specified.
Positioning and storage
Steel wheels, two universal rear wheels, and a two-piece handle address moving and storing the jack, while its steel construction means it is not a lightweight carry-in option.
Vehicle contact features
The rubber saddle, rotating and detachable saddle design, and foam handle bumper are useful touches for vehicle contact and handling.
Key Features and Specifications of VEVOR Racing Jack
- Rated to lift up to 2.5 tons, or 5,500 pounds.
- Lifting range runs from 3.35 inches to 14.96 inches.
- Uses a single-piston hydraulic pump.
- Steel construction with steel wheels; the two rear wheels are universal for steering and positioning.
- A detachable, 360-degree rotating rubber saddle and foam handle bumper are intended to protect vehicle contact areas.
- The 31.5-inch handle separates into two pieces for storage.
- Includes a built-in load system intended to prevent use beyond the rated capacity; the product description also identifies CE, UKCA, and ASME standards.
Pros and Cons of VEVOR Racing Jack
Pros
- Low 3.35-inch starting height may help with access under lower vehicles.
- The 2.5-ton capacity suits a variety of common vehicle-lifting needs when used within the rating.
- Rotating, detachable rubber saddle and foam handle bumper offer protective contact features.
- Two-piece handle is easier to store than a single full-length handle.
- Steel wheels and universal rear wheels are designed to help with movement and steering.
Consider before buying
- The maximum lifting height is 14.96 inches, which may not provide enough travel for every repair setup.
- A steel floor jack is a substantial garage tool rather than a compact portable jack; the listed weight is 13.6 kg.
- The single-piston design does not specify a quick-lift pump rate, so buyers prioritizing rapid repeated lifts may want to compare pump details.
Who Should Buy VEVOR Racing Jack?
Good fit
Consider this VEVOR jack if you want a steel floor jack for occasional maintenance in a home garage and your vehicle's lifting points are accessible at 3.35 inches or higher.
The 2.5-ton rating, rubber saddle, and rotating saddle design make it a practical feature set for routine lifting, with the two-piece handle helping when storage space is limited.
Before choosing it, compare the jack's 14.96-inch maximum with the lift your specific job requires.
Confirm the vehicle and the point being lifted are within the rated capacity, and use appropriate support equipment for work under a raised vehicle.
The built-in load system is not a substitute for matching the jack to the task.
Who should skip it
Look elsewhere if the job requires a maximum lift beyond 14.96 inches or a jack rated for a heavier load. The listed capacity and lift range should set the boundary for your use.
This may not be the best fit if you need a very light jack to carry with the vehicle or expect a specified fast pump action.
Check the listed weight and single-piston design against how and where you plan to use it.
What the VEVOR Racing Jack's Lift Range Means
Access starts at 3.35 inches
The minimum height is the first practical fit check. Measure the clearance at the intended lifting point, including any approach angle needed to roll a floor jack underneath.
The low-profile designation and 3.35-inch figure suggest a design for lower access than a taller starting jack, but they do not guarantee clearance on every vehicle.
Plan around the 14.96-inch ceiling
A jack's maximum height determines how far its saddle can raise the vehicle at the lifting point.
This model reaches 14.96 inches, so compare that with the clearance required for the specific work rather than assuming the maximum is enough for every tire, brake, or suspension task.
A separate suitable support stand may be needed once the vehicle is raised.
Capacity is a task-specific limit
The 2.5-ton rating is a maximum load figure, not a reason to assume the jack suits every truck or SUV. Consider the load at the point being lifted and follow the vehicle manufacturer's lifting guidance.
The built-in load system is intended to prevent use beyond capacity, while careful selection and setup remain essential.
Handling and storage details
The steel wheels and two universal rear wheels are meant to aid steering and rolling during positioning. The rotating saddle can be aligned with a lifting point, and the two-piece handle can be separated for storage.
These details support garage use, though the listed 13.6 kg weight is relevant if you expect to move the jack often.
Alternatives to VEVOR Racing Jack
One useful alternative is included for a different balance of capacity, reach, and pump design.
Industrial Floor Jacks alternative

1,000+ ratings
Read Amazon ReviewsVEVOR 2 Ton Low Profile Steel Floor Jack
Choose the main jack when its higher 2.5-ton rating is the priority and its 14.96-inch reach is sufficient.
Consider this alternative when a lower 3-inch starting height, greater 18.5-inch maximum lift, or dual-piston design better fits the vehicle and work, while accounting for its lower 2-ton capacity.
- This VEVOR model has a 2-ton capacity, a 3-inch minimum height, and an 18.5-inch maximum height.
- It uses a dual-piston pump and has a rotating saddle, disassemblable handle, and large wheels with swivel casters.
- The main jack is rated for 2.5 tons, starts at 3.35 inches, and reaches 14.96 inches, using a single-piston pump.
Is VEVOR Racing Jack Worth It?
The VEVOR 2.5 Ton Low Profile Steel Racing Floor Jack is worth considering for home-garage lifting when its 2.5-ton rating and 14.96-inch maximum suit the vehicle and job.
Its low starting height, rotating rubber saddle, steel wheels, and split handle make a practical combination for routine maintenance.
Buy only after checking clearance at the lifting point, required lift height, and load against the jack's limits.
If your work needs more reach or a faster-pump design, compare models around those specific requirements before settling on this one.
Your review at a glance

1,000+ ratings
Read Amazon ReviewsVEVOR 2.5 Ton Low Profile Steel Racing Floor Jack
A practical choice for DIYers and enthusiasts who need a steel floor jack for cars, trucks, or SUVs and value a low starting height.
- Rated to lift up to 2.5 tons, or 5,500 pounds.
- Lifting range runs from 3.35 inches to 14.96 inches.
- Uses a single-piston hydraulic pump.
- Steel construction with steel wheels; the two rear wheels are universal for steering and positioning.